This add is written in English,
Since we have many international customers, some products that will be shipped across countries.
The Race Lab stage I camshafts, designed for stock engines with OEM dualsprings or lightly upgraded springs and stock compression.
Will work best with added compression or displacement, but do work great compared to other brands on the small b16 engine with short stroke and low velocity ports.
Due to lift/duration times, ramp developed mainly to increase torque within the whole powerband and slightly raise the peak power a couple of houndred rpms later.
Will increase around 10-20hp and up to 60-70hp with Race Lab stage III Head, Header, intake, crank case ventilation, the right tune etc without adding more cubic or compression ratio.
Should be used with our stage III or stage IIII high velocity heads for optimum performance.
Camshaft can be dialed in zero but are recomended to be fully dialed in. remember to “ALWAYS check piston to wall clearences!” We do not take any responsibility for faulty assembly of these camshafts
Watch the parts beeing tested here: